Key Features
- Higher polyamine blend for industrial formulation use
- Suitable as an intermediate for asphalt additives and epoxy curing agent systems
- Water-soluble and compatible with selected polar solvents
- Alkaline amine blend with high amine number
- Supplied as a viscous liquid for industrial processing
- Suitable for industrial and professional applications
Typical Applications
- Intermediate for asphalt additive manufacture
- Raw material for epoxy curing agent formulations
- Industrial amine-based formulation systems
Technical Summary (Indicative)
- Chemical type: Higher polyamine blend
- Composition: Blend of higher polyethylene polyamines and alkanolamines
- Supply form: Viscous liquid
- Color: Yellow to yellowish brown
- Odor: Ammoniacal
- Amine number: 1200–1400 mg KOH/g
- Dynamic viscosity (50 °C): Typical 40 mPa.s
- Relative density (20 °C): 1.024
- pH (25% solution): 12
- Flash point: 176 °C
- Boiling point: 254 °C
- Water content: max. 1.0 %
Product Quality (Indicative Specification Reference)
- Appearance: Yellowish brown
- Color: max. 10 Gardner
- Amine number: min. 1200, max. 1400 mg KOH/g
- Viscosity (50 °C): max. 100 mPa.s
- Water: max. 1.0 wt%
- AEEA / DEA / HE-DETA / L-TETA: Report value
Recommended Use
- Typically used as a formulation intermediate in asphalt additive systems and epoxy curing agent manufacture
- Formulation ratio, dosage, and processing conditions should be determined through laboratory and production trials
- Performance should be verified under actual application and end-use conditions before commercial adoption
Note
- Indicative information only. The values shown do not constitute a product specification or application guarantee.
- Final suitability should be determined by the user based on formulation design, raw material compatibility, processing conditions, and end-use requirements.
Documentation & Compliance
- Certificate of Analysis (COA): May be provided per batch subject to commercial scope
- Safety Data Sheet (SDS): Available in accordance with destination requirements
- Labels: Prepared in accordance with applicable destination regulations
- Industrial and professional use only
Packaging & Logistics
- Packaging: Standard approved industrial packaging
- MOQ: Subject to packaging configuration and destination requirements
- Lead time: Indicative lead time, to be confirmed upon order acceptance
- Incoterms: Quoted case by case
Storage & Handling
- Store in tightly closed original containers under appropriate industrial storage conditions
- Handling procedures should follow the applicable Safety Data Sheet (SDS)
- Compatibility, transfer, and storage arrangements should be evaluated based on plant conditions and regulatory requirements