Key Features
- Cycloaliphatic diamine based on isophorone chemistry
- Colorless, low-viscosity liquid with faint amine odor
- Suitable for epoxy hardener formulations for room-temperature and heat-cured systems
- Supports low-viscosity hardener design and good humidity resistance in cured systems
- Can contribute to chemical resistance, heat distortion performance, and color stability in epoxy systems
- Suitable for industrial and professional applications
Typical Applications
- Hardeners for solvent-free, room-temperature curing epoxy systems
- Hardeners for heat-cured epoxy systems
- Epoxy self-leveling and trowelable flooring systems
- Civil engineering applications such as paving, concrete protection, and repair
- Protective coatings with corrosion-resistance requirements
- Adhesives and anchoring compounds
- Chain extender for polyurethanes
- Intermediate for dyes and specialty polyamides
Technical Summary (Indicative)
- Chemical name: Isophorone diamine / 3-aminomethyl-3,5,5-trimethylcyclohexylamine
- Chemical type: Cycloaliphatic diamine
- Supply form: Clear liquid
- Molecular weight: 170.3 g/mol
- Viscosity: 19 mm²/s
- Amine value: 660 mg KOH/g
- H-active equivalent: 42.6 g/val
- Relative density (20 °C): 0.91 g/cm³
- Flash point: 117 °C
- Boiling point: 253 °C
- Solidification point: 8 °C
Product Quality (Indicative Specification Reference)
- Purity: ≥ 99.7 %
- Appearance: Clear liquid
- Color: max. 15 APHA
- Water content: max. 0.2 %
- Aminonitrile: < 0.15 %
- Secondary and tertiary amino compounds: < 0.15 %
Recommended Use
- Typically used as a raw material for epoxy hardener formulation and related amine chemistry applications
- Formulation design, dosage, and curing profile should be evaluated under actual application conditions
- Performance should be verified through formulation and end-use trials before commercial use
Documentation & Compliance
- Certificate of Analysis (COA): May be provided per batch subject to commercial scope
- Safety Data Sheet (SDS): Available in accordance with destination requirements
- Labels: Prepared in accordance with applicable destination regulations
- Industrial and professional use only
Packaging & Logistics
- Packaging: Standard approved industrial packaging
- MOQ: Subject to packaging configuration and destination requirements
- Lead time: Indicative lead time, to be confirmed upon order acceptance
- Incoterms: Quoted case by case
Storage & Handling
- Store in original tightly closed containers below 25 °C
- Protect from moisture and carbon dioxide during storage
- Avoid aluminum containers; glass, stainless steel, and similar compatible containers are recommended
- The product may crystallize below 15 °C
- If crystallization occurs, warm the entire contents to a maximum of 60 °C and mix thoroughly before use