Key Features
- Improves wetting of glass fibers and carbon fibers in composite systems
- Helps reduce air entrapment and porosity during processing
- Helps avoid dry spots and reduce scrap risk
- Particularly suitable for closed-mold processes
- High non-volatile content supports process suitability in enclosed systems
- Epoxy-functional groups support integration into the resin matrix
Typical Applications
- Fiber-reinforced composite systems
- Glass fiber reinforced plastics
- Carbon fiber reinforced plastics
- Ambient-curing resin systems
- Closed-mold composite processing
Technical Summary (Indicative)
- Chemical type: Mixture of oligomeric substances with wetting agents
- Supply form: Liquid
- Function: Fiber wetting improvement
- Application field: Fiber-reinforced composites
- Density (20 °C): 0.89 g/ml
- Epoxy equivalent weight: 250–320 g/eq
- Non-volatile matter (10 min, 150 °C): > 90%
Recommended Use
- Recommended dosage: 0.5–3.0% additive (as supplied), based on the total formulation
- The additive can be incorporated at any stage of the formulation process
- Optimal dosage should be determined through laboratory and formulation trials
Note
- Indicative information only. Typical values do not constitute specification limits.
- Final suitability should be evaluated by the user under actual processing conditions.
Documentation & Compliance
- Certificate of Analysis (COA): May be provided per batch subject to commercial scope
- Safety Data Sheet (SDS): Available in accordance with destination requirements
- Labels: Prepared in accordance with applicable destination regulations
- Industrial and professional use only
Packaging & Logistics
- Packaging: Standard approved industrial packaging
- MOQ: Subject to packaging configuration and destination requirements
- Lead time: Indicative lead time, to be confirmed upon order acceptance
- Incoterms: Quoted case by case
Storage & Handling
- Recommended storage and transportation temperature: 5 °C to 40 °C
- Separation or turbidity may occur below 5 °C
- Warm to 20 °C and mix well before use if phase separation occurs